Views: 0 Author: Site Editor Publish Time: 2024-05-14 Origin: Site
Ringlock scaffolding is a modular system built from vertical standards, horizontal ledgers and diagonal braces. Rosette nodes on the standards provide connection points for the ledger and brace heads, which are secured with wedges. Platforms, base components, edge protection and access components complete the specified arrangement.
This article explains the main components and connection features using Easy Scaffolding's catalogue information. It also shows how to read specific model descriptions without treating every Ringlock component as interchangeable.
| Component | Function in the arrangement | Details to identify |
|---|---|---|
| Standard | Vertical member with rosette connection nodes | Length, tube specification, rosette position and vertical joint details |
| Ledger | Horizontal member connecting standards | Bay length, ledger head and wedge connection |
| Diagonal brace | Diagonal member forming part of the bracing arrangement | Intended bay dimensions, brace head and connection details |
| Base collar and adjustable base jack | Components of the scaffold base arrangement | Matching series, dimensions and specified base layout |
| Steel plank or aluminium-plywood platform | Deck component for the specified platform arrangement | Length, width, end connection and supporting arrangement |
| Toe board and stair components | Components for the specified edge protection and access arrangement | Matching dimensions, connections and layout |
The component list identifies the main parts of a system. The required quantities, positions, restraints and supporting conditions come from the scaffold layout and applicable design information.
The rosette is the connection node on a Ringlock standard. Ledger and brace heads connect at these nodes, with wedges forming part of the locking connection. The standard, rosette, head and wedge therefore need to be considered together when identifying a component series.
A matching tube diameter does not establish that two components will fit or perform together. Head shape, rosette geometry, wedge fit and the vertical joint between standards also matter. For an existing scaffold, identify the original component series and compare the relevant drawings before introducing replacement or additional parts.
The following entries illustrate how a part number identifies a particular catalogue description. They are examples from one component catalogue, rather than a combined specification for every Ringlock product.
| Part number | Component | Catalogue dimensions |
|---|---|---|
| R-std300 | Standard | 3.0 m length |
| R-led305 | Ledger | 3.05 m length |
| SWP305 | Steel plank | 3.05 m length; 320 mm width |
| AWB305 | Aluminium-plywood platform | 3.05 m length; 610 mm width |
Source: Easy Scaffolding, EASY SCAFFOLDING CATALOGUE, Standard, Ledger, 320mm Width Steel Plank and Aluminum Plywood Platform sections. Confirm the current drawing and specification for the selected product. These dimensions do not establish a complete scaffold's load capacity.
The same catalogue records 320 mm wide steel planks and 610 mm wide aluminium-plywood platforms. It also lists separate brackets described for one, two or three 320 mm planks. Platform width and bracket description should therefore be read together with the specified supporting arrangement.
A bracket description identifies a component option; it does not establish that any plank, bracket and ledger combination is suitable. Check the deck end connections, support details and the intended configuration as a matched arrangement.
Toe boards, stair stringers, stair treads and handrails are additional components to identify in the layout. Listing only standards and ledgers leaves the platform and access arrangement incomplete.
Easy Scaffolding's catalogues contain more than one Ringlock dimension series. Keep the selected standards, ledgers, braces and platform components consistent with the intended layout. For braces, distinguish the bay dimensions shown in a specification from the brace's physical overall length.
Material grades and surface treatments also belong to a particular product specification. Record the grade and finish stated for the selected model rather than combining options from different catalogue versions into one assumed specification.
A catalogue identifies products and their listed dimensions. Component drawings provide the details needed to review connections and fit. Any test report used for a project needs to match the identified sample or assembly, dimensions, test method and stated conditions.
A component test and a system load assessment answer different questions. Neither a familiar product name nor a report for a different configuration establishes the capacity of the proposed scaffold. Use the selected configuration's documentation when reviewing the project requirements.
Browse Easy Scaffolding's Ringlock product category for the available listings. For a comparison with the parts you already use, send the component drawings or parts list, including the required dimensions, quantities and finish.
For a purchasing checklist covering layout, platforms and documentation, see Choosing Ringlock Scaffolding: 6 Checks Before Ordering.